AC/DC Ferro-Resonant Power supplies:
Regulated or unregulated. Gear tray mounted or enclosed. Unregulated power range 10VA - 2kvA. Regulated power range 60VA - 1kvA.
![]()
![]()
. All C-Tick approved
Regulated supplies use robust ferro-resonant transformers.
These units are designed to give long life, come with a 7 year warranty, conform to AS3108 isolating transformer safety specifications and are 100% Australian made. Wherever you have the need to run security systems, PLC systems, charge battery banks or need a power supply to handle large switching transients, the CVT range is the answer. The 12V and 24V units have the ability to change the transformer tap to give either a 13.8V or 28V output for charging Batteries.
Specifications:
|
|
Non standard input or output voltages readily available.
Characteristics:
- Outputs of ferro-resonant transformers do not need to be fused.
- Can withstand permanent short circuit or overload conditions.
- Have electrostatic shielding fitted between primary and secondary windings.
- Can be connected in series or parallel to increase load/voltages (limits may apply)
- Battery charging capabilities. Please call for further information.
- Unit does not require forced air cooling.
- Inputs may be fused but the transformers can handle mains surges of up to 55% and absorb input transients of over 2,000V.
- Due to unstable frequency it is not recommended to use these units with generators. Only use the specific frequency as any frequency changes cause a disproportionate change in output volts.
Models:
Over 20 versions are available in sizes ranging from 60 Watts up to 1000 Watts. Unregulated units are also available. We can manufacture power supplies to your specifications.